• Colle PRB COL PRO C2 ET - Colle
1 1

BOSTIK MC200 C2T tile adhesive

BOSTIK MC200 C2T tile adhesive

€17,63
€17,63
Sale Sold out

Consult us for the availability of this product

C2 T adhesive mortar for interior and exterior floors and interior walls

Benefits

  • New works and renovation
  • Construction site special
  • Excellent adhesion
  • Versatility

DESTINATIONS


Improved single-component C2T adhesive mortar intended for laying ceramic coverings and natural stones of all porosity and large formats (up to 3600 cm²).


  • Interior walls and interior/exterior floors.
  • New works and renovation.
  • Allows the application of tiles on: floors over crawl spaces, intermediate floors, terraces, basins and swimming pools.


IMPLEMENTATION


Substrate preparation


  • Refer to the CPT and DTU 52.2 in force
  • New substrates must be clean, dry, sound, solid, surfaces free of grease, laitance, traces of plaster, etc. They must be aged:
    • 1 month for concrete slabs
    • 2 months for concrete walls and floors
    • 15 days for cement screeds
    • 48 hours for indoor cementitious coatings
  • On calcium sulphate screed, apply our primer PRIMASOL R at saturation.


Preparation of the mixture


  • Pour into a clean bucket 6.0 l to 6.5 l of water per 25 kg bag.
  • Introduce the powder into the water and mix with an electric mixer equipped with a suitable whisk until a smooth and homogeneous paste is obtained.
  • Leave to stand for a few minutes then remix before application


Application


  • Spread the mortar-adhesive on the support with the smooth side of the spatula then adjust the thickness of the furrows with the notched side.
  • For laying by double gluing, apply a smooth and continuous layer to the back of the tiles before posting on the grooves of glue on the floor.
  • Do not apply too much surface and beat the tiles well in order to obtain an optimal transfer.
  • Eliminate residues of MC 200 Worksite on the tiles or between the joints with a damp sponge as the installation progresses.
  • After drying the MC 200 Worksite (24 hours minimum), grouting will be carried out with one of the following products:
    • J 100 End Seal (width from 1 to 6 mm)
    • J 125 Wide Gasket (width from 3 to 20 mm)
    • J 150 Gasket Rustic (width from 5 to 80 mm)
    • J 175 Joint Flex (width from 2 to 15 mm)
    • J 200 HRC seal (width from 2 to 15 mm)
    • J 300 Epocolor (width from 2 to 15 mm)


Consumption


TILES AREA in cm² S < 50 50 < S ≤ 500 S 500 < S ≤ 1100 1100 < S ≤ 2200 2200 < S ≤ 3600*
SPATULA U3 U6 or U9 U9 U9 or half moon 20*8mm
FLOOR
INTERIOR 		SE 1.5 3.5 - 4.5
OF 5 - 6 6 - 7 7 - 8
EXTERIOR FLOOR SE 1.5
OF 4 - 5 5 - 6 6 - 7 7 - 8


SE = single gluing DE = double gluing


* NATURAL STONE ONLY


TILES AREA in cm² < 50 50 < S ≤ 500 S 500 < S ≤ 2000 2000<S≤3600
SPATULA U3 U6 U9
INTERIOR WALL SE 1.5 3.5 - 5
OF 6 7


SE = single gluing DE = double gluing

View full details